ELAFLEX Configurator Hose Assemblies

Select: Hose Type

Product Name	Yellow Band
Description	Fuelling hoses for petroleum based products, aircraft and marine fuelling hoses. Lining: NBR

Hose Type

Type HD

Additional Info

Type HD

High Pressure Fuelling Hose
(without helix)
Size: DN 10 to DN 100

Add to compare

Product Name	Type HD
Part Number	HD
Short Description	High Pressure Fuelling Hose (without helix)
Description	'Yellow Band' high pressure fuelling hose without helix for reel operation. Ideal for all petroleum based products. Temperature range -30° up to +90° C (temporarily up to +110° C). Electrical conductivity <10⁶ Ohm. Corresponds to EN 1761. Can be calibrated according to European regulations. Approved acc. to German military standard VG 95 955 Typ D. Corresponds to EN 12115.
Comment	The lining is resistant to swelling, solubility and discolouration. It is flexible at low temperatures. The cover is resistant to abrasion and weathering and furthermore provides a very good low temperature flexibility. Meets the material group NBR 1 of the EN 12115. Please note: When used for suction the distance between the pipe ends must not be larger than the inner diameter. Hose clamps type SK see catalogue page 291.
Lining	Nitrile rubber (NBR) black, no fuel-solubility
Reinforcements	Two low tensile textile braids for extreme low volume increase under pressure
Cover	Chloroprene (CR), black, conductive
Certificates	DNV • GL - type examination certificate for fuelling hoses.
Marking	Yellow bands every 4 mtr. and continuous, vulcanised embossing. Please note: Marking of HD 10 with longitudinal yellow stripe.
Marking Sample	ELAFLEX HD 40 · MINERALOELPRODUKTE · 90° C · PETROLEUM PRODUCTS · EN 1761 · Ω · 25 BAR · · ContiTech · MADE IN GERMANY · (Batch No.) · 3Q-16
Size	DN 10 to DN 100
Product Sheet	Page 103-104
PDF Certificates	DNV • GL - type examination certificate

Type TW

Additional Info

Type TW

Tank Truck Hose
(with steel helix)
Size: DN 19 to DN 100: Type TW
DN 125 to DN 200: Type STW

Add to compare

Product Name	Type TW
Part Number	TW
Short Description	Tank Truck Hose (with steel helix)
Description	'Yellow Band' smooth bore tank truck hose with kink resistant steel helix for all petroleum based products with an aromatic content up to 50%. Temperature range -30° up to +90° Celsius. Electrical conductivity <10⁶ Ohm. Approved to German military standard VG 95 955 type S. Complies with EN 12115 and EN 1761.Type STW = reinforced TW design. Particularly suitable as marine bunker hose (details see catalogue page 129).
Comment	The tube of the types TW, LTW and STW is resistant to swelling and diffusion, does not stiffen and is flexible at low temperatures. However, the hose tube is sensitive to ozone. Therefore unused hoses must be stored with capped ends. The cover is very resistant to abrasion and weather. Meets the material group NBR 1 of EN 12115.
Lining	NBR, conductive, black, no fuel solubility
Reinforcements	Textile braids with two crossed tinned copper strands and embedded non-kinking galvanised steel helix in the conductive layer
Cover	Chloroprene (CR), black, abrasion resistant, el. conductive
Certificates	DNV • GL - type examination certificate for fuelling hoses.
Marking	Yellow bands every 2,5 mtr. and continuous embossing
Marking Sample	ELAFLEX TW 50 · EN ISO 1825 E · 20 BAR · EN 12115 · NBR 1 · SD · Ω/T · EN 1761 · EN 1765 S15 · NFPA 407 · El 1525 E · GRADE 2 300 PSI · AS 2683 · VG 95955 S · Ω · · MADE IN GERMANY · · 4Q-20
Size	DN 19 to DN 100: Type TW DN 125 to DN 200: Type STW
Product Sheet	Page 105-106
PDF Certificates	DNV • GL - type examination certificate

Type LTW

Additional Info

Type LTW

Light Weight Tank Truck Hose
(with steel helix)
Size: DN 50 to DN 100

Add to compare

Product Name	Type LTW
Part Number	LTW
Short Description	Light Weight Tank Truck Hose (with steel helix)
Description	'Yellow Band' light weight tank truck hose with smooth bore and with corrugated cover. Easy to handle due to high flexibility, with double helix. Same material, range of application and the yellow bands as type TW.
Comment	The tube is resistant to swelling and diffusion, does not stiffen and is flexible at low temperatures. However, the hose tube is sensitive to ozone. Therefore unused hoses must be stored with capped ends. The cover is very resistant to abrasion and weather. Meets the material group NBR 1 of EN 12115. Other dimensions (i.e. 63, 125, 150) on request. Type LTW meets EN 1761 with a max. working pressure of 10 bar and a minimum burst pressure of 40 bar. Due to the elongation of the flexible construction only apply the usual filling pressure up to maximum 6 of bar for pressure operation.
Lining	NBR, conductive, black, no fuel solubility
Reinforcements	Textile braids and embedded non-kinking galvanised steel helix in the conductive layer
Cover	Chloroprene (CR) black, conductive
Certificates	DNV • GL - type examination certificate for fuelling hoses.
Marking	Yellow bands every 2,5 mtr. and continous embossing
Marking Sample	ELAFLEX LTW 50 · NBR · SD · EN 1761 · Ω · 10 BAR · MADE IN GERMANY · · 4Q-20
Size	DN 50 to DN 100
Product Sheet	Page 105-106
PDF Certificates	DNV • GL - type examination certificate

Type LG

Additional Info

Type LG

Lightweight Gravity Discharge
Road Tanker Hose,
Type 'LG'
Size: DN 50, DN 75, DN 100

Add to compare

Product Name	Type LG
Part Number	LG
Short Description	Lightweight Gravity Discharge Road Tanker Hose, Type 'LG'
Description	Elaflex provides a new solution for fuel delivery to petrol stations: Type 'LG' Lightweight Gravity Discharge road tanker hoses.The easy to handle rubber hose has been developed for pressureless service, to fill underground storage tanks. At a glance: excellent flexibility – also in winter operation, low weight, high flowrate due to smooth bore, robust, suitable for tough continuous operation.
Application	Lightweight and highly flexible gravity discharge hose for loading from road tankers to underground storage tanks. Well suited for electronic cross-over prevention systems (COP) due to the integrated steel strands in the construction. The hose may also be used as Stage 1B balanced vapour recovery hose (on request also in size 2" / ID 50 mm). Type LG is used for gravity discharge only. For safety reasons, the hose is constructed to pressure rating PN 4 bar, burst pressure >20 bar. Suitable for petroleum based products including hydrocarbon vapours, aromatics content up to 60%. Temperature range -40° C up to +70° C. Electrical resistance <10⁶ Ohm if static wire (steel strand) are not connected.
Comment	ADVANTAGES - low weight, high flexibility - stays flexible also in cold temperature conditions - due to the external PVC helix the hose easily glides over the ground and into / out of the road tanker stowage tube
Lining	NBR, antistatic, no fuel solubility
Reinforcements	Textile plies with static wire
Cover	Lack rubber with yellow PVC helix
Marking	Yellow bands every 2,5 mtr. and continuous embossing
Marking Sample	LG 3" · NBR · GRAVITY / SCHWERKRAFT · NBR · Ω · -40° C / +70° C · 3Q19 · ELAFLEX
Size	DN 50, DN 75, DN 100
Product Sheet	Information 5.16

Type GPS

Additional Info

Type GPS

Vapour Recovery Hose
(with steel helix)
Size: DN 50

Add to compare

Product Name	Type GPS
Part Number	GPS
Short Description	Vapour Recovery Hose (with steel helix)
Description	Type GPS is a flexible, lightweight hose for Stage 1B balanced vapour recovery (during the unloading of road tankers into the storage tank).For the assembling, clamp type SPANNLOC or SPANNFIX fittings can be used. If the steel helix is connected at both ends, GPS is suitable for electronic filling cross-over-prevention systems.Designed for 10 bar working pressure with safety factor of 4. Temperature range -30° up to +90° C.
Lining	NBR, electrically conductive, suitable for all petroleum based products including hydrocarbon vapours, aromatics content up to 50 %. No fuel solubility, low diffusion.
Reinforcements	Two textile braids, incorporated galvanized steel helix in the conductive layer.
Cover	Chloroprene (CR) black, el. conductive, abrasion resistant, resistant against weather and ageing.
Marking	Continuous, vulcanized embossing
Marking Sample	GPS 50 · GASPENDELSCHLAUCH · VAPOUR
Size	DN 50
Product Sheet	Information 8.06

Type HD-C

Additional Info

Type HD-C

Aircraft Refueling Hose
(without helix)
Size: DN 10 to DN 100

Add to compare

Product Name	Type HD-C
Part Number	HD-C
Short Description	Aircraft Refueling Hose (without helix)
Description	'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 10⁶ Ohm.
Application	Hydrant inlet and into-plane hose. Up to size 2½" as deck hose. The hose does not kink with a permanent pressure of least 0,5 bar.
Comment	Specification: Meets Standard EN ISO 1825 (EN 1361), EI 1529 C, NFPA 407 and AS 2683. Approved acc. to German military standard VG 95 955. Specified by almost all major oil companies. Standard type 'HD-C' with two textile braids. Light weight, flexible hose for pressure service.
Lining	Nitrile rubber (NBR), antistatic, no fuel solubility
Reinforcements	Textile braids without metallic strands
Cover	Chloroprene (CR), conductive, ozone and flame resistant, highly abrasion resistant
Certificates	DNV • GL - type examination certificate for aviation refuelling hoses.
Marking	Yellow bands every 4 mtr. and continuous embossing Please note: Marking of HD 10 C with longitudinal yellow stripe.
Marking Sample	ELAFLEX HD 100 C · EN ISO 1825 C · 20 BAR · EN 12115 NBR 1 · D · Ω/T · EN 1761 · NFPA 407 · EI 1529 C · GRADE 2 · 300 PSI · AS 2683 · VG 95 955 D · 25 BAR · Ω · · MADE IN GERMANY · · 4Q-20
Size	DN 10 to DN 100
Product Sheet	Page 107-108
PDF Certificates	DNV • GL - type examination certificate

Type VHD-C

Additional Info

Type VHD-C

Aviation Refuelling Hose
(without helix)
Size: DN 38 to DN 100

Add to compare

Product Name	Type VHD-C
Part Number	VHD-C
Short Description	Aviation Refuelling Hose (without helix)
Description	'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 10⁶ Ohm.
Application	Fortified hose suitable for reel-, into-plane and hydrant inlet operations, as well as riser systems. In non pressure situations this type is more stable against kinking and flattening.
Comment	Special type 'VHD' with three textile braids and thicker wall for lower bending radii and good suction rates.
Lining	Nitrile rubber (NBR), antistatic, no fuel solubility
Reinforcements	Textile braids without metallic strands
Cover	Chloroprene (CR), conductive, ozone and flame resistant, highly abrasion resistant
Certificates	DNV • GL - type examination certificate for aviation refuelling hoses.
Marking	2 yellow bands every 4 mtr. and continuous embossing
Marking Sample	ELAFLEX VHD 63 C · EN ISO 1825 C · 20 BAR · EN 1361 C · EN 12115 NBR 1 · D · Ω/T · EN 1761 · EI 1529 C · VG 95 955 D · AS 2683 · Ω · PN 20 · · ContiTech · MADE IN GERMANY · 1Q-17
Size	DN 38 to DN 100
Product Sheet	Page 107-108
PDF Certificates	DNV • GL - type examination certificate

Type PHD-F

Additional Info

Type PHD-F

Aviation Refuelling Hose
(with plastic helix)
Size: DN 38 to DN 75

Add to compare

Product Name	Type PHD-F
Part Number	PHD-F
Short Description	Aviation Refuelling Hose (with plastic helix)
Description	'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 10⁶ Ohm.
Application	For alternative fuelling and defuelling operation. Up to size 2½"" the diameter remains stable even with low bending radii.
Comment	Special type 'PHD' with non metallic plastic helix and thick wall for enhanced lateral stability.
Lining	Nitrile rubber (NBR), antistatic, no fuel solubility
Reinforcements	Textile braids without metallic strands
Cover	Chloroprene (CR), conductive, ozone and flame resistant, highly abrasion resistant
Certificates	DNV • GL - type examination certificate for aviation refuelling hoses.
Marking	3 yellow bands every 4 mtr. and continuous embossing
Marking Sample	ELAFLEX PHD 75 F · EN ISO 1825 F · 20 BAR · EN 1361 C · EN 12115 NBR 1 · D · Ω/T · EN 1761 · EI 1529 C · VG 95 955 D · AS 2683 · Ω · PN 20 · · ContiTech · MADE IN GERMANY · 1Q-17
Size	DN 38 to DN 75
Product Sheet	Page 107-108
PDF Certificates	DNV • GL - type examination certificate

Type TW-E

Additional Info

Type TW-E

Aviation Refuelling Hose
(with steel helix)
Size: DN 25 to DN 100

Add to compare

Product Name	Type TW-E
Part Number	TW-E
Short Description	Aviation Refuelling Hose (with steel helix)
Description	'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 10⁶ Ohm.
Application	For tank trucks and the connection between truck and trailer as well as riser systems (see overleaf). Not approved for hydrant inlet and into-plane fuelling.
Comment	Suction-/discharge hard wall hose with galvanised steel helix for high suction and for gravity discharge.
Lining	Nitrile rubber (NBR), antistatic, no fuel solubility
Reinforcements	Textile braids without metallic strands
Cover	Chloroprene (CR), conductive, ozone and flame resistant, highly abrasion resistant
Certificates	DNV • GL - type examination certificate for aviation refuelling hoses.
Marking	Yellow band every 4 mtr. and continuous embossing
Marking Sample	ELAFLEX TW 100 E · EN ISO 1825 E · 20 BAR · EN 12115 NBR 1 · SD · Ω/T · EN 1761 · EI 1529 C · VG 95 955 S · AS 2683 · Ω · PN 20 · · ContiTech · MADE IN GERMANY · 1Q-17
Size	DN 25 to DN 100
Product Sheet	Page 107-108
PDF Certificates	DNV • GL - type examination certificate

Type FHD

Additional Info

Type FHD

Marine Collapsable Hose
(without helix)
Size: DN 75 to DN 254

Add to compare

Product Name	Type FHD
Part Number	FHD
Short Description	Marine Collapsable Hose (without helix)
Description	Type FHD is a collapsible marine bunkering hose. lt can be reeled up flat, takes little space to stow away and is easy to handle. Used as pressure discharge hose for all petroleum based products with an aromatic content up to 50%, on bunkering ships, tankers as well as 'flexible pipeline'. Suitable for naval mobile supply and for offshore facilities. Meets German military standard VG 95955 and EN 1765, type L.
Application	For pressure only. Approved by the German military (naval forces).
Comment	With a sufficient permanent pressure the hose does not kink even with low bending radii. The reinforcement is constructed in such a way that the hose keeps its whole diameter even with 1 bar flow pressure. Type FHD is not suitable for gravity discharge and for suction. Please avoid permanent kinking!
Lining	NBR black, seamless, electrically dissipative, no fuel-solubility
Reinforcements	Low tensile textile braids with two crossed tinned copper strands
Cover	Chloroprene (CR), black, electrically dissipative, resistant to abrasion, weathering
Certificates	Declaration of conformity acc. to pressure equipment directive 2014/68/EU.
Marking	Two yellow bands every 4 mtr., longitudinal yellow stripe and vulcanised embossed stamps with type, size, EN 1765 type L, manufacturer and production date. FHD 75 and FHD 100 with continuous embossing.
Size	DN 75 to DN 254
Product Sheet	Seite 129-130
PDF Certificates	Declaration of conformity

Type STW

Additional Info

Type STW

Marine Hose
(with helix)
Size: DN 50 to DN 200

Add to compare

Product Name	Type STW
Part Number	STW
Short Description	Marine Hose (with helix)
Description	Type STW is a marine suction and discharge hose for tanker vessels, also suitable for gravity discharge because the helix helps to keep the diameter round. As light bunker hose for all petroleum based products with an aromatic content up to 50 %, on bunkering ships, tankers and other ships. Ideal also as flexible duct for floating bridges to compensate for level differences. Meets German military standard VG 95 955 and EN 1765, type S.
Lining	NBR black, antistatic, no fuel-solubility
Reinforcements	Textile braids (STW 200 Nylon Cord) and galvanised steel helix
Cover	Chloroprene (CR), black, electrically dissipative
Certificates	Declaration of conformity acc. to pressure equipment directive 2014/68/EU.
Marking	Yellow band; every 2,5 mtr. and vulcanised continuous embossing.
Marking Sample	ELAFLEX STW 150 · SD · EN 1765 ·S15 ·VG 95955 · Ω · 15 BAR · · MADE IN GERMANY · · 1Q-20
Size	DN 50 to DN 200
Product Sheet	Page 129-130
PDF Certificates	Declaration of conformity

Type SBL / SBS

Additional Info

Type SBL / SBS

Bunkering-Hose
(without / with helix)
Size: DN 100 to DN 300

Add to compare

Product Name	Type SBL / SBS
Part Number	SBL / SBS
Short Description	Bunkering-Hose (without / with helix)
Description	Marine Cargo Hoses (Bunkering Hoses) with conical transition to the fitting and covered reinforcements. Vulcanised built-in flange nipples. Meets EN 1765.
Application	For bulk loading and unloading of bunkering ships and tankers, for petroleum based products up to 50 % aromatic content. Temperature range from -35° C up to +82° C, temporarily until +90° C.
Lining	NBR black, el. dissipative, no fuel-solubility
Reinforcements	Multiple low tensile textile cord layers, standard type SBS with galvanized steel helices
Cover	Chloroprene (CR), black, smooth, el. dissipative
Marking	Yellow bands and vulcanised embossed stamps according to standard and customer requirements, stating type, size, manufacturer and production date.
Size	DN 100 to DN 300
Product Sheet	Page 131-132

2Size (ID)

3Length (L1)

4Coupling Type 1

5Coupling Type 2

6Part No.

Your choice:

Choose additional options
or click here to go on.