Configurator Hose Assemblies

HomeBack to Start
  • Hose Type
  • Size (ID)
  • Length (L1)
  • Coupling Type 1
  • Coupling Type 2
  • Part No.
Select: Size (ID) (inner diameter)
1
Hose Type: Orange Band (LPG)
Product NameOrange Band (LPG)
DescriptionLPG hoses according to EN 1762 for propane, butane, and their mixtures.
Type LPG 16 also for AdBlue.
Lining: NBR
2
Hose Type: Type LPG — Liquid Petroleum Gas Hose
Product NameType LPG
Part NumberLPG
Short DescriptionLiquid Petroleum Gas Hose
Description'Orange Band' Liquefied Petroleum Gas hose to EN 1762.
For propane, butane and their mixtures to EN 589. As the hose lining is resistant to diffusion the hose is also suitable for natural gas.
Use with propene (propylene) possible - pricking required. Not suitable for ammonia. Rugged and long-lasting construction with low tensile braids.
Burst pressure >100 bar. Temperature range -40° C up to +70° C (Special type LPG-LT does not crack down to -50° C).
Approved by DVGW, approval No. DG-4621 AU 0049.
ApplicationAs reel hose for supplies to domestic and industrial storage tanks, as pump hose for vehicle refuelling, for bulk loading and unloading from rail tankers, road tankers and ships.
CommentFor special suction / pressure operation needs the type LPGS with stainless steel helix is available on request.
LiningNitrile rubber (NBR), black, electrically conductive, diffusion resistant
ReinforcementsTextile braids with 2 crossed tinned copper strands
CoverChloroprene (CR), black, electrically conductive, flame and abrasion resistant, ozone, UV and ageing resistant
CertificatesDeclaration of conformity acc. to pressure equipment directive 2014/68/EU - Category I and II.
Manufacturer's declaration.
DNV • GL - type examination certificate for liquefied petroleum gas hoses.
DVGW - type examination certificate.
MarkingOrange bands every 2,5 mtr. and continuous, abrasion resistant embossing as specified in the EN standard 1762.
Please note: Marking of LPG10 (BUTAPAL10) with longitudinal orange stripe.
Marking Sample

ELAFLEX LPG 32 · EN 1762 D · Ω · FLÜSSIGGAS · L.P.GAS · TEMPERATUR - 40° C +70° C · DVGW – DG-4621 AU 0049 · M · 25 BAR / 350 PSI · · ContiTech · MADE IN GERMANY · 3Q-17

SizeDN 10 to DN 200
Product Sheet
Page 115-116
PDF Certificates
Declaration of conformity - Category I
Declaration of conformity - Category II
Manufacturer's declaration
DNV • GL - type examination certificate
DVGW - type examination certificate
2
Size (ID)
ID 10 mm (3/8")

ID 10 mm (3/8")

ID 13 mm (½")

ID 13 mm (½")

ID 19 mm (¾")

ID 19 mm (¾")

ID 25 mm (1")

ID 25 mm (1")

ID 32 mm (1¼")

ID 32 mm (1¼")

ID 32 mm (1¼") LT (Low Temperature)

ID 32 mm (1¼") LT (Low Temperature)

ID 38 mm (1½")

ID 38 mm (1½")

ID 38 mm (1½") LT (Low Temperature)

ID 38 mm (1½") LT (Low Temperature)

ID 50 mm (2")

ID 50 mm (2")

ID 50 mm (2") LT (Low Temperature)

ID 50 mm (2") LT (Low Temperature)

ID 75 mm (3")

ID 75 mm (3")

ID 75 mm (3") LT (Low Temperature)

ID 75 mm (3") LT (Low Temperature)

ID 100 mm (4")

ID 100 mm (4")

ID 150 mm (6")

ID 150 mm (6")

ID 200 mm (8")

ID 200 mm (8")

3Length (L1)
4Coupling Type 1
5Coupling Type 2
6Part No.

Part Number

LPG...

Hose TypeType LPG — Liquid Petroleum Gas Hose
Product NameType LPG
Part NumberLPG
Short DescriptionLiquid Petroleum Gas Hose
Description'Orange Band' Liquefied Petroleum Gas hose to EN 1762.
For propane, butane and their mixtures to EN 589. As the hose lining is resistant to diffusion the hose is also suitable for natural gas.
Use with propene (propylene) possible - pricking required. Not suitable for ammonia. Rugged and long-lasting construction with low tensile braids.
Burst pressure >100 bar. Temperature range -40° C up to +70° C (Special type LPG-LT does not crack down to -50° C).
Approved by DVGW, approval No. DG-4621 AU 0049.
ApplicationAs reel hose for supplies to domestic and industrial storage tanks, as pump hose for vehicle refuelling, for bulk loading and unloading from rail tankers, road tankers and ships.
CommentFor special suction / pressure operation needs the type LPGS with stainless steel helix is available on request.
LiningNitrile rubber (NBR), black, electrically conductive, diffusion resistant
ReinforcementsTextile braids with 2 crossed tinned copper strands
CoverChloroprene (CR), black, electrically conductive, flame and abrasion resistant, ozone, UV and ageing resistant
CertificatesDeclaration of conformity acc. to pressure equipment directive 2014/68/EU - Category I and II.
Manufacturer's declaration.
DNV • GL - type examination certificate for liquefied petroleum gas hoses.
DVGW - type examination certificate.
MarkingOrange bands every 2,5 mtr. and continuous, abrasion resistant embossing as specified in the EN standard 1762.
Please note: Marking of LPG10 (BUTAPAL10) with longitudinal orange stripe.
Marking Sample

ELAFLEX LPG 32 · EN 1762 D · Ω · FLÜSSIGGAS · L.P.GAS · TEMPERATUR - 40° C +70° C · DVGW – DG-4621 AU 0049 · M · 25 BAR / 350 PSI · · ContiTech · MADE IN GERMANY · 3Q-17

SizeDN 10 to DN 200
Product Sheet
Page 115-116
PDF Certificates
Declaration of conformity - Category I
Declaration of conformity - Category II
Manufacturer's declaration
DNV • GL - type examination certificate
DVGW - type examination certificate
Click to Compare
Your choice:
Choose additional options
or click here to go on.
© ELAFLEX HIBY / Privacy Terms
Last Update: 11.12.2020