HB-ST 19 - ELAFLEX Configurator Hose Assemblies

Select: Length (L1)

Product Name	Special Hoses
Description	Special hoses for foodstuffs, ammoniac, hot air, cement, hot asphalt, steam and hot water.

Product Name	Type HB-ST
Part Number	HB-ST
Short Description	Tar spraying and bitumen hose for road construction machines (without / with steel helix)
Description	Pressure hose for road construction machines, especially for hot bitumen and heavy heating oil. Temperature range: - 25° C up to + 220° C. Meets EN 13482, Type 2 SB/B (DN 19 and DN 32 analogue). PLEASE NOTE: Not suitable for brown coal tar oil and coal oil (toluene). Read the safety hints for the use of hot bitumen hoses on catalogue page 136. Permanent operation temperatures above 220° C significantly reduces hose lifetime.
Comment	PLEASE NOTE: HB hoses are designed for a nominal pressure of 10 bar and a burst pressure of min. 40 bar at +20° C. Working pressure of 7 bar is allowed for service with hot products up to +200° C / +392° F. Pressure test (55 min / 15 bar) upon request against surcharge. Conductivity: To ensure a safe electrical conductivity of the hose assemblies the steel helix has to be securely fixed to the hose tails at both ends.
Lining	Special elastomer, seamless
Reinforcements	Steel braids and embedded steel helix, zinc plated (DN 19 with steel braid only)
Cover	Special elastomer, electrically dissipative, resistant against abrasion, weathering and ageing
Marking	Brown double helix and embossed continuously
Marking Sample	HB 19 ST · EN 13482 · ASPHALT - BITUMEN · TYPE 2 SB / B · PN 20 BAR · 220° C · ELAFLEX 3Q-15
Size	DN 19 to DN 50
Product Sheet	Page 135-136
	Information 3.15

Product Name	ID 19 mm (¾")
Part Number	19

Length (L1)

max. reel length = 40 m (131.2 feet)

unit

	,
metres		centimetres

4Coupling Type 1

5Coupling Type 2

6Part No.

0,00 m

Part Number

HB-ST 19...

Hose Type

Type HB-ST — Tar spraying and bitumen hose for road construction machines (without / with steel helix)

Product Name	Type HB-ST
Part Number	HB-ST
Short Description	Tar spraying and bitumen hose for road construction machines (without / with steel helix)
Description	Pressure hose for road construction machines, especially for hot bitumen and heavy heating oil. Temperature range: - 25° C up to + 220° C. Meets EN 13482, Type 2 SB/B (DN 19 and DN 32 analogue). PLEASE NOTE: Not suitable for brown coal tar oil and coal oil (toluene). Read the safety hints for the use of hot bitumen hoses on catalogue page 136. Permanent operation temperatures above 220° C significantly reduces hose lifetime.
Comment	PLEASE NOTE: HB hoses are designed for a nominal pressure of 10 bar and a burst pressure of min. 40 bar at +20° C. Working pressure of 7 bar is allowed for service with hot products up to +200° C / +392° F. Pressure test (55 min / 15 bar) upon request against surcharge. Conductivity: To ensure a safe electrical conductivity of the hose assemblies the steel helix has to be securely fixed to the hose tails at both ends.
Lining	Special elastomer, seamless
Reinforcements	Steel braids and embedded steel helix, zinc plated (DN 19 with steel braid only)
Cover	Special elastomer, electrically dissipative, resistant against abrasion, weathering and ageing
Marking	Brown double helix and embossed continuously
Marking Sample	HB 19 ST · EN 13482 · ASPHALT - BITUMEN · TYPE 2 SB / B · PN 20 BAR · 220° C · ELAFLEX 3Q-15
Size	DN 19 to DN 50
Product Sheet	Page 135-136
	Information 3.15

Size (ID)

ID 19 mm (¾")

Product Name	ID 19 mm (¾")
Part Number	19

	,
feet / Fuß		Inch