ELAFLEX Configurator Hose Assemblies

Select: Hose Type

Product Name	Special Hoses
Description	Special hoses for foodstuffs, ammoniac, hot air, cement, hot asphalt, steam and hot water.

Hose Type

Type LG

Additional Info

Type LG

Lightweight Gravity Discharge
Road Tanker Hose,
Type 'LG'
Size: DN 50, DN 75, DN 100

Add to compare

Product Name	Type LG
Part Number	LG
Short Description	Lightweight Gravity Discharge Road Tanker Hose, Type 'LG'
Description	Elaflex provides a new solution for fuel delivery to petrol stations: Type 'LG' Lightweight Gravity Discharge road tanker hoses.The easy to handle rubber hose has been developed for pressureless service, to fill underground storage tanks. At a glance: excellent flexibility – also in winter operation, low weight, high flowrate due to smooth bore, robust, suitable for tough continuous operation.
Application	Lightweight and highly flexible gravity discharge hose for loading from road tankers to underground storage tanks. Well suited for electronic cross-over prevention systems (COP) due to the integrated steel strands in the construction. The hose may also be used as Stage 1B balanced vapour recovery hose (on request also in size 2" / ID 50 mm). Type LG is used for gravity discharge only. For safety reasons, the hose is constructed to pressure rating PN 4 bar, burst pressure >20 bar. Suitable for petroleum based products including hydrocarbon vapours, aromatics content up to 60%. Temperature range -40° C up to +70° C. Electrical resistance <10⁶ Ohm if static wire (steel strand) are not connected.
Comment	ADVANTAGES - low weight, high flexibility - stays flexible also in cold temperature conditions - due to the external PVC helix the hose easily glides over the ground and into / out of the road tanker stowage tube
Lining	NBR, antistatic, no fuel solubility
Reinforcements	Textile plies with static wire
Cover	Lack rubber with yellow PVC helix
Marking	Yellow bands every 2,5 mtr. and continuous embossing
Marking Sample	LG 3" · NBR · GRAVITY / SCHWERKRAFT · NBR · Ω · -40° C / +70° C · 3Q19 · ELAFLEX
Size	DN 50, DN 75, DN 100
Product Sheet	Information 5.16

Type LBD

Additional Info

Type LBD

Foodstuff-Hose
(without helix)
Size: DN 19 to DN 38

Add to compare

Product Name	Type LBD
Part Number	LBD
Short Description	Foodstuff-Hose (without helix)
Description	White band hose for all foodstuff s, milk, oils, fats, flour, molasses, dextrose and sirups. Temperature range -25° to +90° Celsius. The hoses can be temporarily steamed out with up to +130° C.
Comment	PLEASE NOTE: The tube is odorless, tasteless and not discolouring. It meets the laws for foodstuff s as recommended by the XXI of BfR and FDA.
Lining	NBR white, electr. non-conductive, conform to FDA
Reinforcements	Textile braids with tinned copper strands
Cover	NBR compound, blue, non-conductive
Marking	Hose is marked with white bands at 2,5 mtr. intervals and embossed continuously. Meets the requirements of the material group NBR 3 of EN 12115.
Marking Sample	ELAFLEX LBD 25 · EN 12115 NBR 3 · D · M · LEBENSMITTEL · 90° C · FOOD STUFFS · 16 BAR · · GERMANY · 3Q-17
Size	DN 19 to DN 38
Product Sheet	Page 123

Type LBS

Additional Info

Type LBS

Foodstuff-Hose
(with steel helix)
Size: DN 50 to DN 100

Add to compare

Product Name	Type LBS
Part Number	LBS
Short Description	Foodstuff-Hose (with steel helix)
Description	White band hose for all foodstuff s, milk, oils, fats, flour, molasses, dextrose and sirups. Temperature range -25° to +90° Celsius. The hoses can be temporarily steamed out with up to +130° C.
Comment	PLEASE NOTE: The tube is odorless, tasteless and not discolouring. It meets the laws for foodstuff s as recommended by the XXI of BfR and FDA.
Lining	NBR white, electr. non-conductive, conform to FDA
Reinforcements	Textile braids with tinned copper strands
Cover	NBR compound, blue, non-conductive
Marking	Hose is marked with white bands at 2,5 mtr. intervals and embossed continuously. Meets the requirements of the material group NBR 3 of EN 12115.
Marking Sample	ELAFLEX LBS 50 · EN 12115 NBR 3 · SD · M · LEBENSMITTEL · 90° C · FOOD STUFFS · 16 BAR · · GERMANY · 3Q-17
Size	DN 50 to DN 100
Product Sheet	Page 123

Type AMX

Additional Info

Type AMX

Ammoniac-Hose
Size: DN 13 to DN 50

Add to compare

Product Name	Type AMX
Part Number	AMX
Short Description	Ammoniac-Hose
Description	Ammoniac hose according to EN ISO 5771 for water-free, liquid and gas ammonia. Temperature range -40° C up to +55° C. Burst pressure >125 bar.
Application	Discharge hose for handling of ammonia for example during the production of fertiliser (urea), chemicals, pulp and ammonia water.
Comment	No stock item: Minimum quantity and other dimensions on request.
Lining	EPDM, electrically dissipative
Reinforcements	Type...PA with textile braids, Type...SS with stainless steel braids
Cover	EPDM, black, electrically dissipative, resistant to flame, abrasion, weathering and ageing
Marking	Hose is marked with red green bands at 2,5 mtr. intervals and embossed continuously
Marking Sample	ELAFLEX AMX 019 PA · AMMONIAC ANHYDRE · ISO 5771 · 25 BAR · · GERMANY · 3Q-17
Size	DN 13 to DN 50
Product Sheet	Page 123

Type KS

Additional Info

Type KS

Hot-Air-Compressor-Hose
Size: DN 50 to DN 110

Add to compare

Product Name	Type KS
Part Number	KS
Short Description	Hot-Air-Compressor-Hose
Description	Hot Air Compressor Hose for discharge of silo bulk vehicles. Temperature range -30° C up to +160° C. Special type available with steel helix.
Application	As connection hose between the compressor and silo container to directly, quickly and completely unload the vehicle into the storage silos.
Comment	Please note: Suitable for SPANNLOC and SPANNFIX safety clamps. Avoid too short installation length and kinking.
Lining	EPDM (black or light colour), seamless, smooth, higher resistant against hot air
Reinforcements	Textile braids
Intermed. Layer	EPDM, black
Cover	Rubberized textile braids
Marking	Continuous ink stamping without coloured bands
Marking Sample	ELAFLEX – KS 75 HELL – KOMPRESSOR – – MADE IN GERMANY – 3Q-17
Size	DN 50 to DN 110
Product Sheet	Page 123

Type HB

Additional Info

Type HB

Hose for Hot Asphalt
(with steel helix)
Size: DN 50 to DN 100

Add to compare

Product Name	Type HB
Part Number	HB
Short Description	Hose for Hot Asphalt (with steel helix)
Description	Hot Bitumen hose 'Brown Band', for filling of hot bitumen and heavy fuel oil. Temperature range -25° C to max. +200° C. Not suitable for lignite-tar oil and coal-tar oils. Meets EN 13482.
Comment	PLEASE NOTE: Hot bitumen is dangerous! The safety hints see overleaf, have to be strictly observed. HB hoses are designed for a nominal pressure of 10 bar and a burst pressure of min. 40 bar at +20° C. Working pressure of 7 bar is allowed for service with hot products up to +200° C / +392° F. Pressure test (55 min/15 bar) upon request against surcharge.Conductivity: To ensure a safe electrical conductivity of the hose assemblies the steel helix has to be securely fixed to the hose tails at both Ends.
Lining	Special elastomer, seamless
Reinforcements	Two textile braids with tinned copper strands and embedded steel helix, zinc plated
Cover	Special elastomer, electrically conductive
Marking	Brown bands every 2,5 mtr. and continous vulcanised embossing
Marking Sample	HB 50 · EN 13482 · ASPHALT - BITUMEN · TYPE 1 SB / B · PN 7 BAR · 200° C · ELAFLEX 1Q-16
Size	DN 50 to DN 100
Product Sheet	Page 135-136

Type HB-ST

Additional Info

Type HB-ST

Tar spraying and bitumen hose
for road construction machines
(without / with steel helix)
Size: DN 19 to DN 50

Add to compare

Product Name	Type HB-ST
Part Number	HB-ST
Short Description	Tar spraying and bitumen hose for road construction machines (without / with steel helix)
Description	Pressure hose for road construction machines, especially for hot bitumen and heavy heating oil. Temperature range: - 25° C up to + 220° C. Meets EN 13482, Type 2 SB/B (DN 19 and DN 32 analogue). PLEASE NOTE: Not suitable for brown coal tar oil and coal oil (toluene). Read the safety hints for the use of hot bitumen hoses on catalogue page 136. Permanent operation temperatures above 220° C significantly reduces hose lifetime.
Comment	PLEASE NOTE: HB hoses are designed for a nominal pressure of 10 bar and a burst pressure of min. 40 bar at +20° C. Working pressure of 7 bar is allowed for service with hot products up to +200° C / +392° F. Pressure test (55 min / 15 bar) upon request against surcharge. Conductivity: To ensure a safe electrical conductivity of the hose assemblies the steel helix has to be securely fixed to the hose tails at both ends.
Lining	Special elastomer, seamless
Reinforcements	Steel braids and embedded steel helix, zinc plated (DN 19 with steel braid only)
Cover	Special elastomer, electrically dissipative, resistant against abrasion, weathering and ageing
Marking	Brown double helix and embossed continuously
Marking Sample	HB 19 ST · EN 13482 · ASPHALT - BITUMEN · TYPE 2 SB / B · PN 20 BAR · 220° C · ELAFLEX 3Q-15
Size	DN 19 to DN 50
Product Sheet	Page 135-136
	Information 3.15

Type WPX

Additional Info

Type WPX

Hose for Hot Water
Size: DN 19 to DN 50

Add to compare

Product Name	Type WPX
Part Number	WPX
Short Description	Hose for Hot Water
Description	Hot Water hose for cold and hot water, seawater, cooling and swimming pool water. Temperature range -45° C to +100° C. Short term up to +130° C.
Application	As hot water hose for permanent use in heat pumps, solar plants, for hot water circulating pumps and swimming pools. The WPX can also be used as short hose compensators in the field of sanitary installations.
Lining	EPDM, seamless
Reinforcements	One zinc plated steel braid
Cover	EPDM
Marking	Continuous, vulcanised embossing
Marking Sample	WPX 25 · 100° C · PN 10 · ELAFLEX Germany · 1Q-16
Size	DN 19 to DN 50
Product Sheet	Page 135-136

Type SD PYROPAL (230)

Additional Info

Type SD PYROPAL (230)

Hose for Steam
Size: DN 13 to DN 50

Add to compare

Product Name	Type SD PYROPAL (230)
Part Number	SD PYROPAL
Short Description	Hose for Steam
Description	Steam hose with steel braids for wet saturated steam up to 18 bar (+210° C) and hot water up to +120° C. For cold water up to 25 bar. Minimum burst pressure 180 bar (1:10 safety factor). Not oil resistant. Meets EN ISO 6134 Type 2A.
Comment	PLEASE NOTE: Steam is very dangerous! Therefore only safety fittings with collar and bolted clamps, suitable for re-tightening acc. to EN 14423 should be used (see pages 239 and 285).Overheated steam (dry steam) causes a shorter life time of the hose, even below +210° C. According to ISO 6134 a pressure test has to be done with complete hose assemblies with 90 bar.
Lining	EPDM, seamless, smooth, electrically dissipative
Reinforcements	Two asymmetric zinc plated steel braids
Cover	EPDM, perforated, electrically dissipative resistant against abrasion, ozone, heat and ageing
Marking	Red spiral stripe and continuous, vulcanised embossing
Marking Sample	SD 19 · PYROPAL 230 · EN ISO 6134-2A · EPDM · DAMPF · STEAM · 210° C · Ω · PN 18 · ELAFLEX · · 1Q-16
Size	DN 13 to DN 50
Product Sheet	Page 135-136
	Page PAL 17-18

2Size (ID)

3Length (L1)

4Coupling Type 1

5Coupling Type 2

6Part No.

Your choice:

Choose additional options
or click here to go on.