Select: Size (ID) (inner diameter)
| Hose Type | Type SD PYROPAL (230) — Hose for Steam| Product Name | Type SD PYROPAL (230) |
|---|
| Part Number | SD PYROPAL |
|---|
| Short Description | Hose for Steam |
|---|
| Description | Steam hose with steel braids for wet saturated steam up to 18 bar (+210° C) and hot water up to +120° C. For cold water up to 25 bar. Minimum burst pressure 180 bar (1:10 safety factor).
Not oil resistant.
Meets EN ISO 6134 Type 2A. |
|---|
| Comment | PLEASE NOTE:
Steam is very dangerous! Therefore only safety fittings with collar and bolted clamps, suitable for re-tightening acc. to EN 14423 should be used (see pages 239 and 285).Overheated steam (dry steam) causes a shorter life time of the hose, even below +210° C.
According to ISO 6134 a pressure test has to be done with complete hose assemblies with 90 bar. |
|---|
| Lining | EPDM, seamless, smooth, electrically dissipative |
|---|
| Reinforcements | Two asymmetric zinc plated steel braids |
|---|
| Cover | EPDM, perforated, electrically dissipative resistant against abrasion, ozone, heat and ageing |
|---|
| Marking | Red spiral stripe and continuous, vulcanised embossing |
|---|
| Marking Sample | SD 19 · PYROPAL 230 · EN ISO 6134-2A · EPDM · DAMPF · STEAM · 210° C · Ω · PN 18 · ELAFLEX · · 1Q-16 |
|---|
| Size | DN 13 to DN 50 |
|---|
| Product Sheet | Page 135-136 |
|---|
| Page PAL 17-18 |
|---|
![]() |
|---|
Click to Compare
Choose additional options
or click here to go on.